Soy Wax – CB Advanced – 1kg

R210.00R4,000.00

Create high fragranced, smooth soy container candles with this advanced, well known wax.

1kg(R210 PER KG) R210.00
10kg(R205 PER KG) R2,050.00
20kg(R200 PER KG) R4,000.00
Or split into 4x interest-free payments Learn more
SKU: N/A Categories: ,
 
Description
Specifications:
Usage Instructions:
Care & Caution
Disclaimer:
Download Supporting Documents:

Description

EcoSoya CB-Advanced is a fully formulated, single pour, all-natural soy container wax that requires no additives. EcoSoya CB-Advanced is the advanced container blend in this range and has excellent scent throw and glass adhesion and pours with a smooth level surface and highly resistant to frosting. This wax can take a fragrance load of up to 10%.  We recommend between 6-9%.

It is also non-toxic, vegan, cruelty free, biodegradable & sustainable.

Specifications:

Manufacturer: Kerax UK

Suggested Fragrance Load: 6-9% depending on the potency of the fragrance.

Suggested Colour Temp: 75℃ (colour first)

Suggested Fragrance temp: 65-68℃

Suggested Pour Temp: 58-60℃

Melting Point: 55℃

Solid Form: Flakes

Uses: Container Candles

Usage Instructions:

Note that the below instructions are based on our in-house testing, and you should also explore the below handling sheet, and to conduct your own testing with fragrance loads and colouring. (Download the complimentary testing sheet) We recommend a 6-9% fragrance load using our fragrance range.  We advise the use of a digital thermometer to assist in measuring the correct temperatures of the wax.

INGREDIENTS for 1kg melted wax. Adjust and scale as required.

Measure out the ingredients using a scale.

  1. 1Kg CB ADVANCED WAX PELLETS
  2. Fragrance oil at 6-9% maximum. Depending on the fragrance potency
  3. Pre-selected applicable wick – consult the wick chart for soy wax safe wicks (STB RANGE).
  4. Colour flakes or pellets (optional) – NOTE no colour can be used in massage candles.

EQUIPMENT

  1. Bain Marie (double boiler)
  2. Digital Scale.
  3. Stirring popsicle sticks.
  4. Wick placeholder.
  5. Candle safe jar.
  6. Digital Thermometer.
  7. Cleaning cloths.

Preparation:

  • Ensure that you work on a safe surface, candle wicks are firmly in place, and that the max fill line have been market with a non-permanent marker to ensure that the jars are not over filled.
  • Lay down a few pieces of newspaper, as pouring candles can sometimes be messy.

Step 1 – Melting

  • Melt your wax over a low heat slowly to reach 70℃. The wax will BE CLEAR.
  • Take care not to heat over 75℃ as this can influence the setting and performance of the wax. Overheated wax is very opaque in colour and can result in injury. It can also cause discoloration in the final product.

Step 2 – Adding Colour and Fragrance

  • Add fragrance at 65-68℃ and stir gently for a minute.
  • If adding colour, we advise to add it before at a higher temperature of 75℃ then add the fragrance at 68℃ to ensure that the colour blends well with the wax.
  • Colouring is always at a higher temperature.

Step 3 – Pouring

  • Once your fragrance and colour has blended, and the wax has cooled down to approx. 58-60℃ it is ready to be poured. The wax will still have a clear appearance. If the wax is too cool, it will create cavities in the way when drying the first pour. This wax starts congealing at 54 degrees.

 

 

Step 4 – Curing & Topping Up.

  • Allow wax to cure for 12 hours.
  • Warm up the remainder of the wax using a small Bain Marie to 55℃
  • Top up the final layer of the candle at 53-55 degrees to the maximum fill line of your containers. Allow to set for another 12 hours.
  • For very tall container candles, a half/ half pour would be needed to prevent any sinkholes in the candle.

 

Special Note: Frosting

In the event of frosting, we suggest reheating the wax up to 78- 80℃ to refresh the crystal structure. This should remove the frosting for the repour. With this, please be cautious not to take the wax above this temperature, as holding the wax at this temperature for extended periods of time will discolour the wax.

 

Care & Caution

  • Prioritize safety by wearing goggles and gloves during product preparation.
  • Access the Safety Data Sheet (SDS) and step by step instructions for comprehensive safety guidelines.
  • Exercise caution when working with ANY warmed-up wax product. Use it exclusively within recommended percentages and temperatures for candles.
  • Take care to avoid damage to polished, painted, plastic, or leather surfaces when using wax products. Follow instructions diligently.
  • Store the product out of reach of children and pets. Individuals with perfume sensitivity should use the product cautiously.
  • Always label a candle with a warning label. – https://sacandlesupply.co.za/product/pre-printed-warning-labels/

Disclaimer:

  • The information provided is intended for general informational purposes only. While every effort has been made to ensure accuracy and correctness, it does not constitute a guarantee regarding any specific product properties. Users are responsible for verifying the suitability of products for their intended purposes. The Supplier reserves the right to update product information as necessary due to technical, production, or other developments without prior notice.
  • The availability of our products and/or services may change without notice. If a product is unavailable when you place an order, we will strive to provide information on its expected availability.
  • SA Candle Supply is not liable for any claims or damages arising from products that are out of stock or otherwise unavailable. We reserve the right to discontinue the sale of any product or service at any time without notice.
  • SACS may offer Product Information, including technical details, specifications, recommendations, literature, and other materials (collectively “Product Information”) for customer convenience. The accuracy or completeness of Product Information is not guaranteed and is subject to change without notice; individual testing with our products is always necessary.
  • Products are not manufactured or reserved based on customer requirements or specifications unless explicitly agreed upon in writing by SACS.
  • SA Candle Supply is not responsible for any production flaws in the final product.
  • As the customer, you are responsible for providing usage and safety information labels and information to your clients.
  • Full Terms & Conditions Apply: https://sacandlesupply.co.za/terms-and-conditions/

Download Supporting Documents:

Safety Data Sheet (SDS)

Certificate of Analysis (COA)