Click to enlarge
Titanium Dioxide - 100g R30,00 inc. Vat
Back to products
Wood Wick Sustainers - 50 Units R160,00 inc. Vat

Wood Wicks Cross

SKU: N/A

R160,00 inc. Vat

Cross Wood Wicks deliver a strong flame, even burns, and effortless placement.

Our Cross Wood Wicks appear small in size, but produces a solid flame, and stable burn pool, they are very potent, and the specifications must be followed as instructed as not to warm up the jar sidewalls at all.

These wicks are perfect for soy and paraffin wax, bees wax blended candles, and candles with a heavy Fragrance or Dye Loads.  It is supplied with a round metal sustainer. These wicks do not need any placement holders as they stand upright solidly.

Cross Wood Wick Size
Burning Guide ( General Guide) 

Jar Diameter Cross wick –  Single Wick Cross Wick –  Double Wick
55mm – 75mm 1 X Small Not recommended for jar size
76mm – 85mm 1 X Medium 2 x Small
85mm – 95mm 1 X Large 2 x Small
95mm – 110mm Double wick recommended 2 x Small or Medium

Assembling the wick: Take 2 of the pre-cut wood wicks, on the open ends of each wick, separate them slightly and slide them to fit perfectly, creating a cross, they will interlock once in position. Stand the wick upright and slot into the round sustainer. Add a glue dot to the bottom of the round sustainer (one on each side) and glue down into your jar.

Instructions

Note that the below wick instructions are based on our in-house testing, and you should also conduct your own testing with fragrance loads and colouring. (Download the complimentary testing sheet)

Step 1 – Measuring the Diameter of the Jar

Ensure that you work on a safe surface. It is advised to pack out and re-measure the inside diameter of the jars, write down the diameter as not to choose the incorrect wick.

Step 2 – Select the Wick

Choose the wick based on the diameter provided in the wick table.

Step 3 – Decide to use 1 or 2 Wicks

If your jar has a wider diameter, and you need to use 2 wicks, simply divide the diameter of the jar by the number of wicks you will be using, also refer to the wick table below.

Step 4 – Applying the wick to the Jar

Use a good quality glue gun, place a tiny drop of warm glue onto the metal sustainer. Simply adhere the wick as central in the jar as possible, you can also mark the middle with a non-permanent marker. For double wicks, mentally divide out the jar, mark out the two half sections and place wicks equal distance from the sides and middle.

  • Prioritize safety by wearing goggles and gloves during product preparation.
  • Access the Safety Data Sheet (SDS) and step-by-step instructions for comprehensive safety guidelines.
  • Exercise caution when working with ANY warmed-up wax product. Use it exclusively within recommended percentages and temperatures for candles.
  • Take care to avoid damage to polished, painted, plastic, or leather surfaces when using wax products. Follow instructions diligently.
  • Store the product out of reach of children and pets. Individuals with perfume sensitivity should use the product cautiously.
  • Always label a candle with a warning label. –

    https://sacandlesupply.co.za/product/pre-printed-warning-labels/

This information is for general information purposes only. Whereas great care was taken to ensure accuracy and correctness it does not constitute a guarantee with regard to any particular product properties. It is the obligation of the user to check the products and their suitability for the purpose intended by the user. The Supplier reserves the right to change the information regarding the product covered by this sheet as may be necessary due to technical, production or other developments and requirements without prior notice.

Titanium Dioxide - 100g R30,00 inc. Vat
Back to products
Wood Wick Sustainers - 50 Units R160,00 inc. Vat
Click to enlarge

Wood Wicks Cross

SKU: N/A

R160,00 inc. Vat

Cross Wood Wicks deliver a strong flame, even burns, and effortless placement.

Our Cross Wood Wicks appear small in size, but produces a solid flame, and stable burn pool, they are very potent, and the specifications must be followed as instructed as not to warm up the jar sidewalls at all.

These wicks are perfect for soy and paraffin wax, bees wax blended candles, and candles with a heavy Fragrance or Dye Loads.  It is supplied with a round metal sustainer. These wicks do not need any placement holders as they stand upright solidly.

Cross Wood Wick Size
Burning Guide ( General Guide) 

Jar Diameter Cross wick –  Single Wick Cross Wick –  Double Wick
55mm – 75mm 1 X Small Not recommended for jar size
76mm – 85mm 1 X Medium 2 x Small
85mm – 95mm 1 X Large 2 x Small
95mm – 110mm Double wick recommended 2 x Small or Medium

Assembling the wick: Take 2 of the pre-cut wood wicks, on the open ends of each wick, separate them slightly and slide them to fit perfectly, creating a cross, they will interlock once in position. Stand the wick upright and slot into the round sustainer. Add a glue dot to the bottom of the round sustainer (one on each side) and glue down into your jar.

Instructions

Note that the below wick instructions are based on our in-house testing, and you should also conduct your own testing with fragrance loads and colouring. (Download the complimentary testing sheet)

Step 1 – Measuring the Diameter of the Jar

Ensure that you work on a safe surface. It is advised to pack out and re-measure the inside diameter of the jars, write down the diameter as not to choose the incorrect wick.

Step 2 – Select the Wick

Choose the wick based on the diameter provided in the wick table.

Step 3 – Decide to use 1 or 2 Wicks

If your jar has a wider diameter, and you need to use 2 wicks, simply divide the diameter of the jar by the number of wicks you will be using, also refer to the wick table below.

Step 4 – Applying the wick to the Jar

Use a good quality glue gun, place a tiny drop of warm glue onto the metal sustainer. Simply adhere the wick as central in the jar as possible, you can also mark the middle with a non-permanent marker. For double wicks, mentally divide out the jar, mark out the two half sections and place wicks equal distance from the sides and middle.

  • Prioritize safety by wearing goggles and gloves during product preparation.
  • Access the Safety Data Sheet (SDS) and step-by-step instructions for comprehensive safety guidelines.
  • Exercise caution when working with ANY warmed-up wax product. Use it exclusively within recommended percentages and temperatures for candles.
  • Take care to avoid damage to polished, painted, plastic, or leather surfaces when using wax products. Follow instructions diligently.
  • Store the product out of reach of children and pets. Individuals with perfume sensitivity should use the product cautiously.
  • Always label a candle with a warning label. –

    https://sacandlesupply.co.za/product/pre-printed-warning-labels/

This information is for general information purposes only. Whereas great care was taken to ensure accuracy and correctness it does not constitute a guarantee with regard to any particular product properties. It is the obligation of the user to check the products and their suitability for the purpose intended by the user. The Supplier reserves the right to change the information regarding the product covered by this sheet as may be necessary due to technical, production or other developments and requirements without prior notice.

Related Products

Quick view
Add to wishlist
More Options This product has multiple variants. The options may be chosen on the product page

Cotton Wick LX

R110,00 inc. Vat
Quick view
Add to wishlist
More Options This product has multiple variants. The options may be chosen on the product page

Wood Wick Advanced

R170,00 inc. Vat