“” “”fbpx”" “”

Welcome to our new website!

Kindly please reset your password when trying to log in with your account by selecting forget password. If you experience any issues, please email [email protected]

Soy Coconut Blend Wax - 5kg

In stock
R 755.00

Soy Coconut Blend Wax


Note the price includes vat. 

This product is in a 5kg solid block form.  Not sold in smaller quantities

•          5kg = R676 (R151 per kg)

MUST Add either 10% stearic Acid or 10% powder beeswax to achieve a harder set.

Soy Coconut Blend wax:
This blend of wax is very efficient as an introduction to working with container candle making.  The wax is able to be blended and poured at a lower temperature, hence ensuring a very smooth finish to the candle. This also ensures a faster melt pool paired with the correct wick.
It is much softer than normal soy wax, due to the added coconut element.
Stearic acid can be added at 10% ratio to ensure a harder set.
It also blends well with candle specific colour.

Soy Coconut Blend wax:
  • Is made from hydrogenated and deodorised soy bean and Coconut oil.
  • A medium fragrance tolerance (8%)
  • Smooth initial creamy finish.
  • Good container adhesion.
  • Excellent oil absorption resulting in exceptional hot and cold scent throw.
  • It is a versatile and cost effective Soy Coconut blend wax.
  • Supplier: SA Candle Supply pty Ltd
  • Suggested Fragrance Load: 8 % depending on the potency of the fragrance.
  • Suggested Fragrance temp: 70℃
  • Suggested Pour Temp: 48 – 50℃
  • Melt Point: 50℃
  • Solid Form: Block and appears slightly yellow / cream colour with a soft butter like texture.
  • Uses: Container Candles only / not suited for massage candles
  • Storage: in a cool dry space, as it can melt in mild to high temperatures.
  • Note: This product may contain dark particles on occasion.
Important: Wick selection on this wax is crucial, as it is softer wax, it may require wicking down. Ie selecting a smaller wick, own testing required. We have provided our recommendations below.

Note that the below instructions are based on our in-house testing, and you should also explore the below handling sheet, and to conduct your own testing with fragrance loads and colouring. (Download the complimentary testing sheet) We recommend a 8% fragrance load using our fragrance range.  We advise the use of a digital thermometer to assist in measuring the correct temperatures of the wax.

Ensure that you work on a safe surface, candle wicks are firmly in place, and that the max fill line have been market with a non-permanent marker to ensure that the jars are not over filled.
Lay down a few newspapers, as pouring candles can sometimes be messy.

Step 1 – Melting
  • Wax should be melted in a Bain Marie double pot and should not be exposed to direct heat.
  • Melt your wax over a low heat slowly to reach between 75℃. The wax will have a slight milky look, which is normal.
  • Take care not to heat over 80℃ as this can influence the setting and performance of the wax. Overheated wax is very opaque in colour and can result in injury. It can also cause discolouration in the final product.
  • If adding stearic acid Add to the wax to blend together whilst melting.
Step 2 – Adding Colour and Fragrance
  • Add fragrance at 70/72℃ and stir gently for a minute.
  • If adding colour, we advise to add it before the fragrance to ensure that the colour blends well with the wax.
Step 3 – Pouring
  • Once your fragrance and colour has blended, and the wax has cooled down to approx. 48-50℃ it is ready to be poured. The wax will still have a slight milky appearance. If the wax is too cool, it will create cavities in the way when drying the first pour.
  • This wax does take much longer to cool down to the pouring temperature due to the coconut element. Take regular temperature readings.
If topping up
  • Fill the container and leave 2cm at the maximum filling line for the top-up. Leave at least 500ml of wax for the topping, depending on the volume of candles made.
  • It is important to have the containers at the same temperature as the ambient room temperature.
Step 4 – Curing & Topping up
  • Allow wax to cure for 12 hours. This wax will take much longer to set fully.
If a Top Up is Needed:
  • Warm up the remainder of the wax using a small Bain Marie to 54℃
  • Top up the final layer of the candle at 48-50 degrees to the maximum fill line of your containers. Allow to set for another 12 hours.
  • For very tall container candles, a half/ half pour would be needed to prevent any sinkholes in the candle.

Important NOTE:
  • Soy Coconut blend wax can be a 1 pour candle depending on the ambient setting temperature, use a heat gun to smooth out the tops, if doing 1 pour.
  • To ensure optimal performance, we strongly recommend first-time users conduct a test run on a small batch before using the wax in full-scale production.

Wick Suggestions

Soy Coconut Blend wax is very soft, and wont harden like conventual soy waxes.  Use the below as a guideline to wick correctly for this wax.







Mini Ocher


STB 8 X 1

ECO 6 X 1



STB12 X 1

ECO 8 X 1



Stb14 x 1

Eco10 x 1



STB16 X 1

ECO10 X 1



STB18 X 1

ECO12 X 1



STB22 X 1 / STB10 X 2

ECO 16 X 1


85mm +-

STB10 X 2

ECO10 X 2

  • The information provided is intended for general informational purposes only. While every effort has been made to ensure accuracy and correctness, it does not constitute a guarantee regarding any specific product properties. Users are responsible for verifying the suitability of products for their intended purposes. The Supplier reserves the right to update product information as necessary due to technical, production, or other developments without prior notice.
  • The availability of our products and/or services may change without notice. If a product is unavailable when you place an order, we will strive to provide information on its expected availability.
  • SA Candle Supply is not liable for any claims or damages arising from products that are out of stock or otherwise unavailable. We reserve the right to discontinue the sale of any product or service at any time without notice.
  • SACS may offer Product Information, including technical details, specifications, recommendations, literature, and other materials (collectively "Product Information") for customer convenience. The accuracy or completeness of Product Information is not guaranteed and is subject to change without notice; individual testing with our products is always necessary.
  • Products are not manufactured or reserved based on customer requirements or specifications unless explicitly agreed upon in writing by SACS.
  • SA Candle Supply is not responsible for any production flaws in the final product.
  • As the customer, you are responsible for providing usage and safety information labels and information to your clients.
  • Full Terms & Conditions Apply: Terms & Conditions
  • Prioritize safety by wearing goggles and gloves during product preparation.
  • Access the Safety Data Sheet (SDS) and step by step instructions for comprehensive safety guidelines.
  • Exercise caution when working with ANY warmed up wax product. Use it exclusively within recommended percentages and temperatures for candles.
  • Take care to avoid damage to polished, painted, plastic, or leather surfaces when using wax products. Follow instructions diligently.
  • Store the product out of reach of children and pets. Individuals with perfume sensitivity should use the product cautiously.
  • Always label a candle with a warning labels